Who each one is for

The Govee Pro 200 is for a long or wrapped roofline: a wide two-storey front, a garage return, or a second run over the porch. It is a 200 ft kit with 120 lights at 20 in, and it comes with a Govee app that supports Matter, Alexa and Google Assistant.

The Linkind HP5 100 is for a house that fits inside 100 ft and has no soffit lip to hide a channel under. It has 60 lights at 20 in, sits two cost tiers below the Pro 200, and its bracket mounts on a wall face or a ceiling face.

These are different lengths, so this is not a like-for-like match. The real question is whether your roofline needs more than 100 ft.

The differences that matter

  • Length. 200 ft against 100 ft. The HP5 listing says its controller manages up to 150 ft, but the kit itself is 100 ft of lights, so anything longer means buying more.
  • Pitch and count. Both space lights 20 in apart. The Pro 200 has 120 lights and the HP5 has 60, simply because of the extra length.
  • White. Both cover 2700K to 6500K. The Pro 200 shares its module with the Pro 100, which has dedicated warm and cold white. The HP5 listing says RGB plus tunable white and does not say how the white is made.
  • Brightness. The Pro 200 is up to 50 lm per light. The HP5 listing does not give a per-light lumen figure in our data.
  • Weather. Lights are IP67 on both and the control box or controller is IP65 on both. The Pro 200 adapter is indoor use only, so plan where it sits.
  • Mounting. The Pro 200 uses supplied VHB glue and clips, installed 2 to 4 in from the wall. The HP5 ships 60 brackets, screws and 3M adhesive, and the bracket fits any eave type.
  • Cutting. The Pro 200 can be cut but must not exceed 200 ft in total, and it cannot be spliced with Pro 100 or 150 ft kits. The HP5 arrives as six 16.6 ft strands; our data does not say whether it can be cut. See cutting and extending.
  • App. Pro 200 uses Govee with Matter. The HP5 listing mentions Alexa and Google, not Matter, and our catalogue says the control app is Aidot.

Which to buy

  • Over 100 ft of roofline: the Pro 200. Do not stitch two small kits together if one long run will do.
  • 100 ft or less: the HP5, two cost tiers lower. A 100 ft kit is enough more often than people expect; is 100 ft enough shows the arithmetic.
  • Flush fascia or porch ceiling: the HP5, because its bracket is built for those surfaces.
  • Matter and a larger brand behind the app: the Pro 200.

When to pick neither

If you want the Pro features at 100 ft, look at the Pro 100 against the HP5. If you want something between the two, the Pro 200 against the Lights 2 150 is the next comparison. If you only want lights for a season, a permanent kit is the wrong product; permanent vs seasonal explains the alternative.

Frequently asked questions

Is the Govee Pro 200 better than the Linkind HP5 100?

It is longer and sits in a higher cost tier. The Pro 200 covers 200 ft with 120 lights and supports Matter, while the Linkind HP5 100 covers 100 ft with 60 lights. If your roofline fits in 100 ft, the HP5 is enough.

How long a run can the Linkind HP5 100 handle?

The HP5 100 listing says it manages up to 150 ft, though the kit itself contains 100 ft in six strands of 16.6 ft. The Govee Pro 200 must not exceed 200 ft in total.

Can I mount the Linkind HP5 100 on a wall or ceiling?

Yes. The HP5 100 comes with a bracket that fits a wall face or a ceiling face, plus screws and 3M adhesive. The Govee Pro 200 uses VHB glue and clips instead.

Are the Pro 200 and HP5 100 both weatherproof?

Both list IP67 lights and an IP65 control box or controller. The Pro 200 adapter is indoor use only, so it needs a sheltered spot. Check the warranty terms on each listing before you buy.