A two-storey front in warm white, on the Pro 100.

The Govee Pro 100 placed along the full roofline of the two-storey sample house, every zone set to 2700K warm white. With one colour there is no alternating pattern to read, only the spacing: 66 lights at 20 in, traced over 110 ft of eave and rakes.

Sample house Pro 100 Warm white Rendered 3 September 2026

The sample two-storey house at dusk, lit in warm white

The same house from the same camera position, unlit

Wipe between the unlit photograph and the lit one Before After

Lights placed

by the product's spacing

Pitch

20 in

Zones used

Run traced

110 ft

eave plus rakes

Warm white2700K · one colour, every zone

How this was made: one vision pass traced the scene, the lights were placed along that trace at the product's own spacing with no model involved, and one image pass relit the photo to dusk with every marked point held where it is. The count and colours are ours by construction.

What to look at in this render

The traced run is 110 ft, which is 10 ft more than one 100 ft Pro 100 kit. On a house this size, plan for a second run or leave a rake unlit.
33 zones carry the 66 lights, two to a zone, so an alternating scheme on this house changes colour every second light. In warm white the zones do not show.
The 20 in pitch is the product's own spacing, not a design choice: the same house on other schemes keeps exactly the same 66 points.