A ranch front in red and green, on the Lights 2 150.

At 17 in apart, 48 Lights 2 pucks cover 69 ft of ranch eave in red and green, with the 150 ft kit more than doubling the run needed. It leaves the ranch front with most of the kit unused.

Sample house Lights 2 150 Red and green Rendered 3 September 2026

The sample ranch house at dusk, lit in red and green

The same house from the same camera position, unlit

Wipe between the unlit photograph and the lit one Before After

Lights placed

by the product's spacing

Pitch

17 in

Zones used

Run traced

69 ft

eave plus rakes

Red and greenDecember · alternating zones

How this was made: one vision pass traced the scene, the lights were placed along that trace at the product's own spacing with no model involved, and one image pass relit the photo to dusk with every marked point held where it is. The count and colours are ours by construction.

What to look at in this render

48 lights at 17 in use 48 of the 108 zones, so under half the kit's zones are lit on this house.
The 69 ft run is under half of the 150 ft kit, so the leftover length is worth knowing about before you buy.
Its product notes say the lights are not cuttable and come as fixed segments that chain, so leftover length cannot be trimmed off.
Red and green alternate zone by zone; its product notes describe addressable RGBIC pucks with 16 million colours.
It sits in the highest of the three cost tiers.